Shafts

a. Straightness

The shaft must be straight from the top of the grip to a point not more than 5 inches (127 mm) above the sole, measured from the point where the shaft ceases to be straight along the axis of the bent part of the shaft and the neck and/or socket.

b. Bending and Twisting Properties

At any point along its length, the shaft must:

(i) bend in such a way that the deflection is the same regardless of how the shaft is rotated about its longitudinal axis; and

(ii) twist the same amount in both directions.

c. Attachment to Clubhead

The shaft must be attached to the clubhead at the heel either directly or through a single plain neck and/or socket. The length from the top of the neck and/or socket to the sole of the club must not exceed 5 inches (127 mm), measured along the axis of, and following any bend in, the neck and/or socket. Exception for Putters: The shaft or neck or socket of a putter may be fixed at any point in the head.